シリアルポートの項目にArduino UNOが表示されない

ニキシー管を点灯させるためのソースコードをRaspberry Piにアップロードしようとしたいのですが、シリアルポートの項目に以下のようにArduino UNOの選択肢が無いため、エラーになってしまいます。

どのようにすれば、選択肢を出せることができるでしょうか？

エラー

Arduino: 1.8.13 (Mac OS X), Board: "Arduino Uno"

Sketch uses 1040 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 10 bytes (0%) of dynamic memory, leaving 2038 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

ソースコード

uint8_t currentValue = 0;

#define NIXIE_1_A 2
#define NIXIE_1_B 3
#define NIXIE_1_C 4
#define NIXIE_1_D 5

#define NIXIE_2_A 6
#define NIXIE_2_B 7
#define NIXIE_2_C 8
#define NIXIE_2_D 9

#define NIXIE_3_A 10
#define NIXIE_3_B 11
#define NIXIE_3_C 12
#define NIXIE_3_D 13

#define NIXIE_4_A A0
#define NIXIE_4_B A1
#define NIXIE_4_C A2
#define NIXIE_4_D A3

void setup(){
  pinMode(NIXIE_1_A, OUTPUT);
  pinMode(NIXIE_1_B, OUTPUT);
  pinMode(NIXIE_1_C, OUTPUT);
  pinMode(NIXIE_1_D, OUTPUT);
  nixieWrite(NIXIE_1_A, NIXIE_1_B, NIXIE_1_C, NIXIE_1_D, 0);
}

void nixieWrite(uint8_t a, uint8_t b, uint8_t c, uint8_t d, uint8_t value){
  digitalWrite(d, (value & 0x08) >> 3);
  digitalWrite(c, (value & 0x04) >> 2);
  digitalWrite(b, (value & 0x02) >> 1);
  digitalWrite(a, value & 0x01);
}

void loop(){
  delay(1000);
  currentValue++;
  if(currentValue > 9){
    currentValue = 0;
  }
  nixieWrite(NIXIE_1_A, NIXIE_1_B, NIXIE_1_C, NIXIE_1_D, currentValue);
}