fasdfシェルファイル内に記述すると使えなくなるmysqlコマンド

Question

今回JSON型をinsertしようとしてまずはじめに、mysql内で直接コマンドを叩き、動作チェックしてからshファイルに記述しました。
しかし実行してみるとまったくDBにデータが入っていません。

shファイルでselect文などで中身のデータを確認することはできるのでmysqlとの接続が確認済みです。

#!/bin/bash
declare -i COUNTER
COUNTER=0
while [ "$COUNTER" -lt 200000 ]
do
  mysql -uroot mysql8 -e 'INSERT INTO json_vc (json) VALUES ('{"_id":"58f884046309022eced97572","index":0,"guid":"7c70dc5e-5d98-4d94-8b88-e54050a11d71","isActive":true,"age":38,"eyeColor":"brown","name":"Mathews Cantrell","gender":"male","registered":"2016-12-25T03:44:09 -09:00","latitude":44.302937,"longitude":3.081185,"tags":["voluptate","ex","sit","proident"}')'
  COUNTER=`expr $COUNTER + 1`
  echo $COUNTER
done

こちらを実行すると下記のような文章が出てきてINSERTできません。
下記収まりきらなかったため、一部削除しています。

$ ./json.sh

$ mysql  Ver 8.0.15 for osx10.14 on x86_64 (Homebrew)
Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Usage: mysql [OPTIONS] [database]
  -?, --help          Display this help and exit.
  -I, --help          Synonym for -?
  --auto-rehash       Enable automatic rehashing. One doesn't need to use
                      'rehash' to get table and field completion, but startup
                      and reconnecting may take a longer time. Disable with
                      --disable-auto-rehash.
                      (Defaults to on; use --skip-auto-rehash to disable.)
  -A, --no-auto-rehash 
                      No automatic rehashing. One has to use 'rehash' to get
                      table and field completion. This gives a quicker start of
                      mysql and disables rehashing on reconnect.
  --auto-vertical-output 
                      Automatically switch to vertical output mode if the
                      result is wider than the terminal width.
  -B, --batch         Don't use history file. Disable interactive behavior.
                      (Enables --silent.)
  --bind-address=name IP address to bind to.
  --binary-as-hex     Print binary data as hex
  --character-sets-dir=name 
                      Directory for character set files.
  --column-type-info  Display column type information.
  -c, --comments      Preserve comments. Send comments to the server. The
                      default is --skip-comments (discard comments), enable
                      with --comments.
  -C, --compress      Use compression in server/client protocol.
  -#, --debug[=#]     This is a non-debug version. Catch this and exit.
  --debug-check       This is a non-debug version. Catch this and exit.
  -T, --debug-info    This is a non-debug version. Catch this and exit.
  -D, --database=name Database to use.
  --default-character-set=name 
                      Set the default character set.
  --delimiter=name    Delimiter to be used.
  --enable-cleartext-plugin 
                      Enable/disable the clear text authentication plugin.
  -e, --execute=name  Execute command and quit. (Disables --force and history
                      file.)
  -E, --vertical      Print the output of a query (rows) vertically.
  -f, --force         Continue even if we get an SQL error.
  --histignore=name   A colon-separated list of patterns to keep statements
                      from getting logged into syslog and mysql history.
  -G, --named-commands 
                      Enable named commands. Named commands mean this program's
                      internal commands; see mysql> help . When enabled, the
                      named commands can be used from any line of the query,
                      otherwise only from the first line, before an enter.
                      Disable with --disable-named-commands. This option is
                      disabled by default.
  -i, --ignore-spaces Ignore space after function names.
  --init-command=name SQL Command to execute when connecting to MySQL server.
                      Will automatically be re-executed when reconnecting.
  --local-infile      Enable/disable LOAD DATA LOCAL INFILE.
  -b, --no-beep       Turn off beep on error.
  -h, --host=name     Connect to host.
  -H, --html          Produce HTML output.
  -X, --xml           Produce XML output.
  --line-numbers      Write line numbers for errors.
                      (Defaults to on; use --skip-line-numbers to disable.)
  -L, --skip-line-numbers 
                      Don't write line number for errors.
  -n, --unbuffered    Flush buffer after each query.
  --column-names      Write column names in results.
                      (Defaults to on; use --skip-column-names to disable.)
  -N, --skip-column-names 
                      Don't write column names in results.
  --sigint-ignore     Ignore SIGINT (CTRL-C).
  -o, --one-database  Ignore statements except those that occur while the
                      default database is the one named at the command line.
  --pager[=name]      Pager to use to display results. If you don't supply an
                      option, the default pager is taken from your ENV variable
                      PAGER. Valid pagers are less, more, cat [> filename],
                      etc. See interactive help (\h) also. This option does not
                      work in batch mode. Disable with --disable-pager. This
                      option is disabled by default.
                      SSL FIPS mode (applies only for OpenSSL); permitted
                      values are: OFF, ON, STRICT
  -t, --table         Output in table format.
  --tee=name          Append everything into outfile. See interactive help (\h)
                      also. Does not work in batch mode. Disable with
                      --disable-tee. This option is disabled by default.
  -u, --user=name     User for login if not current user.
  -U, --safe-updates  Only allow UPDATE and DELETE that uses keys.
  -U, --i-am-a-dummy  Synonym for option --safe-updates, -U.
  -v, --verbose       Write more. (-v -v -v gives the table output format).
  -V, --version       Output version information and exit.
  -w, --wait          Wait and retry if connection is down.
  --connect-timeout=# Number of seconds before connection timeout.
  --max-allowed-packet=# 
                      The maximum packet length to send to or receive from
                      server.
  --net-buffer-length=# 
                      The buffer size for TCP/IP and socket communication.
  --select-limit=#    Automatic limit for SELECT when using --safe-updates.
  --max-join-size=#   Automatic limit for rows in a join when using
                      --safe-updates.
  --show-warnings     Show warnings after every statement.
  -j, --syslog        Log filtered interactive commands to syslog. Filtering of
                      commands depends on the patterns supplied via histignore
                      option besides the default patterns.
  --plugin-dir=name   Directory for client-side plugins.
  --default-auth=name Default authentication client-side plugin to use.
  --binary-mode       By default, ASCII '\0' is disallowed and '\r\n' is
                      translated to '\n'. This switch turns off both features,
                      and also turns off parsing of all clientcommands except
                      \C and DELIMITER, in non-interactive mode (for input
                      piped to mysql or loaded using the 'source' command).
                      This is necessary when processing output from mysqlbinlog
                      that may contain blobs.
  --connect-expired-password 
                      Notify the server that this client is prepared to handle
                      expired password sandbox mode.

Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/local/etc/my.cnf ~/.my.cnf 
The following groups are read: mysql client
The following options may be given as the first argument:
--print-defaults        Print the program argument list and exit.
--no-defaults           Don't read default options from any option file,
                        except for login file.
--defaults-file=#       Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.
--defaults-group-suffix=#
                        Also read groups with concat(group, suffix)
--login-path=#          Read this path from the login file.

Variables (--variable-name=value)
and boolean options {FALSE|TRUE}  Value (after reading options)
--------------------------------- ----------------------------------------
auto-rehash                       TRUE
auto-vertical-output              FALSE
bind-address                      (No default value)
binary-as-hex                     FALSE
character-sets-dir                (No default value)
column-type-info                  FALSE
comments                          FALSE
compress                          FALSE
database                          (No default value)
default-character-set             auto
delimiter                         ;
enable-cleartext-plugin           FALSE
vertical                          FALSE
force                             FALSE
histignore                        (No default value)
named-commands                    FALSE
ignore-spaces                     FALSE
init-command                      (No default value)
local-infile                      FALSE
no-beep                           FALSE
host                              (No default value)
html                              FALSE
xml                               FALSE
line-numbers                      TRUE
unbuffered                        FALSE
column-names                      TRUE

Answer 1

まずシェルから

$  mysql -uroot mysql8 -e 'INSERT INTO json_vc (json) VALUES ('{"_id":"58f884046309022eced97572","index":0,"guid":"7c70dc5e-5d98-4d94-8b88-e54050a11d71","isActive":true,"age":38,"eyeColor":"brown","name":"Mathews Cantrell","gender":"male","registered":"2016-12-25T03:44:09 -09:00","latitude":44.302937,"longitude":3.081185,"tags":["voluptate","ex","sit","proident"}')'

を実行して通るかどうかですね。
パスワードの指定とかないですが大丈夫でしょうか？
シングルクォーテーションがきちんと設定されていないようにも見えます

サンプル

MYSQL_PWD="hogehoge" mysql -uroot -Dmydb <<EOL
INSERT INTO tbl(val) VALUES ('{
  "_id":"58f884046309022eced97572",
  "index":0,
  "guid":"7c70dc5e-5d98-4d94-8b88-e54050a11d71",
  "isActive":true,
  "age":38,
  "eyeColor":"brown",
  "name":"Mathews Cantrell",
  "gender":"male",
  "registered":"2016-12-25T03:44:09 -09:00",
  "latitude":44.302937,
  "longitude":3.081185,
  "tags":["voluptate","ex","sit","proident"]
}');
EOL

Comments

[tokuwgawa]

回答ありがとうございました！
上記方法を使ったのですが、-dというオプションがないとエラーが出たので、-d を消してそのままDB名入れたら行けました！

[yambejp]

-dは大文字（-D）です。
転機していただいたエラー（実際にはmysqlクライアントのhelp）にも
-D, --database=name Database to use.
と書いてありますね

[tokuwgawa]

なるほど。。。
shファイルの記述ルールを勉強してみます。