サーバ情報:CentOS6.5 64bit
インストールパッケージ:
ccs-0.16.2-81.el6.x86_64.rpm
clusterlib-3.0.12.1-73.el6.1.x86_64.rpm
compat-readline5-5.2-17.1.el6.x86_64.rpm
corosync-1.4.7-2.el6.x86_64.rpm
corosynclib-1.4.7-2.el6.x86_64.rpm
glib2-2.28.8-4.el6.x86_64.rpm
libibverbs-1.1.8-4.el6.x86_64.rpm
libqb-0.17.1-1.el6.x86_64.rpm
librdmacm-1.0.19.1-1.el6.x86_64.rpm
pacemaker-1.1.12-8.el6.x86_64.rpm
pacemaker-cli-1.1.12-8.el6.x86_64.rpm
pacemaker-cluster-libs-1.1.12-8.el6.x86_64.rpm
pacemaker-libs-1.1.12-8.el6.x86_64.rpm
pcs-0.9.139-9.el6_7.1.x86_64.rpm
perl-TimeDate-1.16-13.el6.noarch.rpm
python-clufter-0.11.2-1.el6.x86_64.rpm
rdma-6.7_3.15-5.el6.noarch.rpm
resource-agents-3.9.5-24.el6.x86_64.rpm
ruby-1.8.7.374-4.el6_6.x86_64.rpm
ruby-irb-1.8.7.374-4.el6_6.x86_64.rpm
ruby-libs-1.8.7.374-4.el6_6.x86_64.rpm
ruby-rdoc-1.8.7.374-4.el6_6.x86_64.rpm
rubygems-1.3.7-5.el6.noarch.rpm
構成:
ーーーーーーーーーーインターネットーーーーーーーーー
192.168.0.1 | 192.168.0.2
eth1 | eth1
APサーバ#1 | APサーバ#2
eth2 | eth3 | eth2 | eth3
192.168.1.1 | 192.168.2.1 | 192.168.1.2 | 192.168.2.2
|---------------ハートビート1-----------| |
|----------ハートビート2---------|
という構成なんですけど
ハートビートが動かなくて
crm_monを実行しても以下のような結果になるんです。
Last updated: Wed Nov 11 15:53:43 2015
Last change: Wed Nov 11 15:32:28 2015
Current DC: NONE
0 Nodes configured
0 Resources configured
設定の間違えと直し方を教えてほしいです。
あとちょっと特殊な環境でインストールするときはインターネットからとってくるのじゃなくてrpmを準備して入れなければならないんで追加のインストールがあるならそのイメージ名も教えてほしいです。
cat corosync.conf
Please read the corosync.conf.5 manual page
compatibility: whitetank
service {
name: pacemaker
ver: 0
use_mgmtd: yes
}
totem {
version: 2
secauth: off
threads: 0
interface {
broadcast: yes
ringnumber: 0
bindnetaddr: 192.168.1.0
mcastport: 5405
ttl: 1
}
transport: udpu
}
nodelist {
node {
ring0_addr: 192.168.1.1
nodeid: 1
}
node { ring0_addr: 192.168.1.2 nodeid: 2 }
}
logging {
fileline: off
to_stderr: no
to_logfile: yes
logfile: /var/log/cluster/corosync.log
to_syslog: yes
debug: off
timestamp: on
logger_subsys {
subsys: AMF
debug: off
}
}
amf {
mode: disabled
}
よろしくお願いします。
あなたの回答
tips
プレビュー