質問をすることでしか得られない、回答やアドバイスがある。

15分調べてもわからないことは、質問しよう!

新規登録して質問してみよう
ただいま回答率
85.50%
Linux

Linuxは、Unixをベースにして開発されたオペレーティングシステムです。日本では「リナックス」と呼ばれています。 主にWebサーバやDNSサーバ、イントラネットなどのサーバ用OSとして利用されています。 上位500のスーパーコンピュータの90%以上はLinuxを使用しています。 携帯端末用のプラットフォームAndroidは、Linuxカーネル上に構築されています。

Q&A

解決済

1回答

4725閲覧

rsyslogのIPアドレスでフィルタができない

Perfume-T-Anata

総合スコア25

Linux

Linuxは、Unixをベースにして開発されたオペレーティングシステムです。日本では「リナックス」と呼ばれています。 主にWebサーバやDNSサーバ、イントラネットなどのサーバ用OSとして利用されています。 上位500のスーパーコンピュータの90%以上はLinuxを使用しています。 携帯端末用のプラットフォームAndroidは、Linuxカーネル上に構築されています。

0グッド

0クリップ

投稿2019/07/14 02:03

前提・実現したいこと

ネットワーク機器のSYSLOGをサーバーに転送しIPアドレスで別ファイルに分けたい

試したこと

https://www.harumaki.net/2014/08/22/rsyslog-property-replacer/
を参考に条件式を作成しRULESの直下に作成しました。
その後rsyslogの再起動を行いmessegeにログが出力されることは確認したのですが
現状testやtest1にログが出力されません。

何か情報をお持ちのかたいらっしゃいましたら
よろしくお願いいたします。

#### RULES #### :fromhost-ip, isequal, "192.168.100.2" -/var/log/test & ~ :fromhost-ip, isequal, "192.168.100.1" -/var/log/test1 & ~

ここに問題に対して試したことを記載してください。

補足情報(FW/ツールのバージョンなど)

CENTOS 7
rsyslog-8.24.0-34.el7.x86_64

ここにより詳細な情報を記載してください。

#rsyslog configuration file # For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html # If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html #### MODULES #### # The imjournal module bellow is now used as a message source instead of imuxsock. $ModLoad imuxsock # provides support for local system logging (e.g. via logger command) $ModLoad imjournal # provides access to the systemd journal #$ModLoad imklog # reads kernel messages (the same are read from journald) #$ModLoad immark # provides --MARK-- message capability # Provides UDP syslog reception $ModLoad imudp $UDPServerRun 514 # Provides TCP syslog reception #$ModLoad imtcp #$InputTCPServerRun 514 #### GLOBAL DIRECTIVES #### # Where to place auxiliary files $WorkDirectory /var/lib/rsyslog # Use default timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat # File syncing capability is disabled by default. This feature is usually not required, # not useful and an extreme performance hit #$ActionFileEnableSync on # Include all config files in /etc/rsyslog.d/ $IncludeConfig /etc/rsyslog.d/*.conf # Turn off message reception via local log socket; # local messages are retrieved through imjournal now. $OmitLocalLogging on # File to store the position in the journal $IMJournalStateFile imjournal.state #### RULES #### :fromhost-ip, isequal, "192.168.100.2" -/var/log/test & ~ :fromhost-ip, isequal, "192.168.100.1" -/var/log/test1 & ~ # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg :omusrmsg:* # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log # ### begin forwarding rule ### # The statement between the begin ... end define a SINGLE forwarding # rule. They belong together, do NOT split them. If you create multiple # forwarding rules, duplicate the whole block! # Remote Logging (we use TCP for reliable delivery) # # An on-disk queue is created for this action. If the remote host is # down, messages are spooled to disk and sent when it is up again. #$ActionQueueFileName fwdRule1 # unique name prefix for spool files #$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) #$ActionQueueSaveOnShutdown on # save messages to disk on shutdown #$ActionQueueType LinkedList # run asynchronously #$ActionResumeRetryCount -1 # infinite retries if host is down # remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional #*.* @@remote-host:514 # ### end of the forwarding rule ### コード

気になる質問をクリップする

クリップした質問は、後からいつでもMYページで確認できます。

またクリップした質問に回答があった際、通知やメールを受け取ることができます。

バッドをするには、ログインかつ

こちらの条件を満たす必要があります。

guest

回答1

0

自己解決

解決しました。
お恥ずかしい話rootユーザーでrsyslogの再起動をしていなかっただけでした。汗

投稿2019/07/14 02:40

Perfume-T-Anata

総合スコア25

バッドをするには、ログインかつ

こちらの条件を満たす必要があります。

あなたの回答

tips

太字

斜体

打ち消し線

見出し

引用テキストの挿入

コードの挿入

リンクの挿入

リストの挿入

番号リストの挿入

表の挿入

水平線の挿入

プレビュー

15分調べてもわからないことは
teratailで質問しよう!

ただいまの回答率
85.50%

質問をまとめることで
思考を整理して素早く解決

テンプレート機能で
簡単に質問をまとめる

質問する

関連した質問